eControl micro - PLC with CODESYS V3
eControl micro - PLC with CODESYS V3
eControl micro - PLC with CODESYS V3
eControl micro - PLC with CODESYS V3
eControl micro - PLC with CODESYS V3
eControl micro - PLC with CODESYS V3

eControl micro

PLC with 7" touch display and CODESYS V3 according to IEC 61131-3. Num­er­ous ex­pan­sion op­tions open up ma­ny areas of app­li­ca­tion for the con­troller

Request
Product Flyer

Key Features

  • Programming language CODESYS V3 acc. to IEC 61131-3
  • Integrated microSD slot
  • 7" touch display
  • CANopen interface acc. to ISO 11898
  • Expansion options for individual adaptions

Description

eControl micro
The control unit has a powerful CPU with 400 MHz, which was specially optimized for CODESYS target and web visualization. The oper­ation is done comfortably via a 7" TFT touch display.

The extremely compact and robust metal housing enables applications in harsh industrial en­vir­on­ments. An integrated Ether­net inter­face can be used for debug­ging, remote main­te­nance, software updates or higher-­level visualization. A USB port allows machine parameters and data records to be exchanged quickly and easily via USB stick (individual scripts can be executed auto­matically). As further communication inter­faces, the PLC is provided with three serial and one CAN connection which is spec­i­fied according to CANopen.

The controller can act as a CANopen master, this can be easily configured from the CODESYS controller configuration and gua­ran­tees the op­timal control of CANopen IOs and drives. All da­ta of the controller are stored on an integrated microSD card of up to 32 GB.

CODESYS programming according to IEC 61131-3
Based on a 32-bit microcontroller with in­te­grated target vi­su­ali­zation on the PLC, eControl micro is programmed with the CODESYS V.3.x runtime system according to IEC 61131-3. For demanding vi­su­ali­za­tion tasks, there are ready-made vi­su­ali­za­tion ele­ments such as trend graphics, alarm tables or pointer in­stru­ments that enable quick and easy operation.

Technical Data

CPUFreescale 400 MHz
RAM128 MB DDR
Memory64 MB
Expandable memorymicroSD card up to 32 GB
TFT-Display7" (optional other sizes available)
Resolution800×480
Touchresistive
Ethernet10/100 Mbit/s
USB1.1
CAN1× CAN interface acc. to ISO 11898
Serial interfaces (Data)2×
Serial interfaces (Debug)1× optional
DIP switch8-pin for variant setting
Dimensions (l×w×h)200 mm × 150 mm × 36 mm
Storage temperature–20°C up to +70°C
Operating temperature0°C up to +50°C (optionally extendable temperature range)
Temperature sensorintegrated
Humidity20 % up to 90 % not-condensing
Protection class frontIP50
Protection class side/rareIP20
Power supply24 V DC ±10 %

Related Products

PLC control with OPC UA

eControl micro II

PLC control with OPC UA server, IO-Link for IoT applications can be used manufacturer and platform independent.

  • 7" Touch display
  • OPC UA server, IO link
  • Codesys V3.5 accord. to IEC 61131-3
  • CAN and EtherCAT interface
PLC eControl mIO

eControl mIO

PLC control with numerous communication interfaces and the possibility to control stepper motors

  • 7" Touch display
  • Numerous IOs, like stepper motor interfaces
  • Integrated microSD slot up to 64 GB
  • Optional: WLAN, Bluetooth
24 V module with 32 freely configurable inputs and outputs

EC-DIO32 RM35

Digital 24 V module with 32 freely configurable in- and outputs and an EtherCAT and CAN inter­face.

  • Signal delay of less than 100 µs
  • 32 freely configurable in- and outputs
  • Suitable for EtherCAT and CAN networks