24 V module with 8 analogue outputs.
Overview of interfaces
8 analogue outputs
The compact housing is made of aluminum. It contains a top hat rail mount and a front cover with all interfaces for better overview in the control cabinet. The technician will note the convenience while working at the bus cabling.
You can configure the baud rate and module address with HEX-switches at the front cover - easy and
Besides its inputs and outputs the IAO08 offers a powerful micro-controller that handles data acquisition
of sensors, control of actors and the processing of any CAN-data. An important safety function is the IAO08‘s guarding capability which is fully integrated into the IO for network surveillance. Furthermore, there is a relay contact (changeover) as an additional safety measure. If there is an absence of guarding by the master registered, the module immediately goes into STOP-mode.
The integrated CAN interface is designed in accordance to DS 301 and 401 for a flexible use in different places and tasks in the CAN bus network. All Sontheim CAN-interfaces comply to ISO 11898.
- Compact aluminum housing with IP20 and an integrated top hat rail mount
- Safety functions for a high process safety
- Easy access to all interfaces
- Own intelligence for complex CAN networks
- Signal delay less than 400 μ-seconds
- Galvanically isolated CAN interface acc. to ISO 11898
- Galvanically isolated inputs and outputs
241 mm × 120 mm × 48 mm
approx.: 800 g
-10°C to 70°C
0°C to 60°C
24 VDC ±10%
approx.: 500 mA
Wires ø 0,25 to 1,5 mm²
1 × LED green for power supply (5 V)
1 × LED green for operation mode (Run)
1 × LED red for error status (Err)
32 × LED green for activated input
Motorola Freescale, 16 Bit
1 × CAN interface acc. to DIN ISO 11898, galv. isolated
Number of outputs
–10 V to +10 VDC