DIO32 8AI-L

Short description:

24 V or 12 V module with 0- 32 configurable digital in- and outputs and 8 analogue inputs.

Hardware
Dimensions (l×w×h)
166 mm × 72 mm × 37 mm
Weight
102 g without clamps
Mounting
Top hat rail
Temperature range
Operating: 0°C to 60°C
extended temperature range available upon enquiry;
Storage: –30°C to 70°C
Humidity
90% non-condensing
Conformity to EMI guidelines
EN 61000-6-4 and EN 61000-6-2 (industrial applications)
Power Supply
12 V +/-20% and 24 V +/-20%
Power consumption
90 mA
220 mA (all IOs + LEDs activ)
Operating status
1 × LED green for operating mode (Run)
1 × LED red for error status (Err)
1 × LED green for power supply
32 × LED green for activated inputs / outputs
CAN
Interface acc. to ISO 11898, assignment acc. to DIN 41652, Connection via SubD9 plug male and female (bridged)
CAN protocol
DS 301 and 401
Number of modules / bus
127
Setting
Module address via 2 DIP-switches
Baud rate via HEX-switch
Cabling
Clamping range 0.25 – 1.5 mm²,
one wire
Clamps
Spring clamp
Wires
Single wire connection,
dismantling 10 mm
Digital inputs
Number of inputs
0 - 32, configurable in blocks of 8 each
Potential isolation
Capacitive coupler
Switching level „1“
+11.0 V to +28.8 V
Switching level „0“
0.0 V to +5.0 V
Input current
4 mA
Sample rate
1 kHz
Signal delay
< 100 μs
Digital outputs
Number of outputs
0-32, configurable in blocks of 8 each
Type of switch
FET-Highside-Switch
Potential isolation
Capacitive coupler
Power supply
VB - 0,16V DC
Output current per channel
625 mA
Max. output current
16 A
Protective circuit
Short circuit and overload protection
Switching frequency
1 kHz
Free-wheeling diode
Yes, controlled inductor require ext. Free-wheeling diodes
Signal delay
< 100 μs
Analogue inputs
Number of inputs
8
Resolution
12 Bit
Potential isolation
Capacitive coupler
Input current
If necessary with insertion option: power input: 4-20 mA (not standard)
Sample rate
1 kHz